The reel is beautiful to look at, built in gold metal with a series of drill-outs that cut weight, allow drainage, and look very cool. But it is also tough enough to spool 140 yards of 80lb test Superline, with a completely rigid frame that eliminates flex and transfers all energy to the crank. Micro Module Gear technology uses more and smaller gear teeth to create efficiency and an ultra-smooth feel. The pinion gear is supported with 6 ball bearings on each end to maintain alignment under the heaviest loads and cut friction between the spool shaft and the gear on the cast.
There is a wide range of gear ratios to choose from - from 5.4: 1 to 7.1: 1 and 8.1: 1. While these numbers seem confused, they do represent an extremely straightforward opportunity. How about a reel with a gear ratio of 8.1: 1? What this number means is that for every single key of the handle the reel will rotate eight times. Nevertheless, this does not mean that a higher gear ratio is superior to a lower gear ratio.

Just because the baitcasting reels in this review are relatively inexpensive does not mean they are low quality. You might even be surprised that some of them offer better performance than some premium reels. So, don’t be fooled that spending a lot of money on a reel will guarantee a good quality product. The best baitcasting reel under 100 run-down is rich with options for you to ponder upon.


But here is the best part; the reel features 4-disc carbon-fiber drag system that claims to offer up to 16.5 pounds drag power. No doubt, this is more than enough stopping power for a smooth casting experience if at all it leaves up to its claims. Also, it comes with 11+1 MaxiDur bearings along with an instant stop anti-reverse feature for incredible casting and quick hook sets. 
What I noticed to be remarkably majestic, that the baitcasting reel, in fact, comes in equipped with a multimode braking system. When casting and revolving take place, it utilizes both the centrifugal braking and magnetic cast control. So, if you manage to hook a fish that fights back, just relax and don’t worry. Cause the line won’t snap off easily.
While you want to fill a spinning reel spool just shy of the edge of the taper on the spool, you can actually get away with having less line on a baitcaster. Because the spool itself un-spins the line from the spool, there is not the friction you have with a spinning reel spool. If a spinning reel spool is half full, it will not cast as well because there is increased friction as the line uncoils off the spool. 
The Globeride incorporations manufacturers fishing gears under the brand name Daiwa. It’s a Japanese company founded in 1958 with subsidiaries across the globe. The fishing gears manufactured to account for the majority of sales made by Globeride Inc. its fishing gears are of top quality make and are exported throughout the world. Along with fishing rods and reels, it also manufactures biking, golf, and tennis gears.

Piscifun’s reel is powerful! It allows you to handle large fish with ease. This low-profile baitcasting reel comes with an advanced three washer design giving it a whopping 18 pounds of drag. Not only is it strong but it uses some of the highest quality gears currently on the market. They are industrial strength, climate resistant Japanese Hami cut 3604 brass gears. As if that weren’t enough this reel has a truly unique feature that sets it apart from many others. It comes equipped with a side plate oil port that allows you maximize and supervise the life, longevity and performance of this reel. This bait caster has a gear ratio of 7.1:1 meaning it is extremely silent and allows you to retrieve your line at a truly amazing rate. This reel sets the bar pretty high, and that’s why it made our list of top baitcasting reels.
The reel frame and side plates are machined aluminum and they give superior strength and help keep the weight down to a light 7.3 ounces. They also make the reel look very handsome. Ten stainless steel bearings and a 6.3:1 gear ratio give smooth, fast retrieves while still providing enough torque for the size of fish the reel is designed to handle. The carbon fiber drag can apply 15lbs of pressure, and it has a very smooth action.
The Shimano Caenan is a beautiful reel that offers outstanding performance. It is clearly a very aesthetically pleasing baitcaster, but it also is a great value as a reel itself. With a retrieve ratio of 6.5:1, it is a fairly quick reeling reel, though not the quickest. This makes it ideal for lures that shouldn’t be reeled too quickly and actually make it an ideal option for the vast majority of fisherman.

This ultra-lightweight baitcasting reel from KastKing weighs just 5.7 ounces and is made from carbon, a material that is naturally resistant to corrosion and so tough that it can practically withstand anything. The 11+1 ball bearings are made from shielded and corrosion resistant MaxiDur, while the spool boasts hardy construction from aero-grade aluminum.
If you are looking to get a reel which is light, and has a fast retrieve, the Ardent Apex Elite Fishing reel is just the one to go for. This reel is designed for superior performance on the water. Being built with a premium 12+1 ball bearing system, it provides a long casting ability with the mag brake system. It features a carbon fiber handle and also offer a firm grip and greater power when cranking hard.
It’s important if you’re looking around the market to not exaggerate your skill-level. If you find other reels such as Spinners to be ideal for you, go for that. Otherwise, allow yourself the freedom to try out new types of reels. A reliable Baitcasting Reel can be another versatile tool at your disposal when getting on the water. Listen to your gut, your reel, and your reason, but most of all: have as much fun as possible. Good luck!
This is a no-nonsense build quality from KastKing. The integrated hard forged aluminum gears, aircraft grade aluminum spool and carbon fiber handle with EVA knobs for smooth reel performance as well as greater convenience. The number of nifty features and special ability of these reels has truly placed it under the best baitcasting reels for the money.
On the other end of the spectrum, baitcasting reels allow for casting lures like jigs, spinner baits and crankbaits with pinpoint accuracy, but there is a dialed in drag resistance and require a higher skill set to be able to thumb the spool as line flows off. If you can’t find that sweet spot of thumb pressure, you’ll experience a backlash bird’s nest of tangled line.
Baitcasters fall into the power fishing category as they are designed to handle heavier lures/baits and handle more aggressive fishing techniques or actions on the water. An example of this type of fishing could include punching weighted lures through lily pads or thick forage, cranking or speed trolling. The spinning reel does better with smaller lures and “finesse fishing” techniques, which would include sensitivity and “feeling” the smallest and lightest fishing bites. This would include fishing techniques like drop-shotting, jigging, bobber fishing, etc. There are many camps with various definitions on what power and finesse fishing is, but in my opinion the baitcasting reel lends best to the power fishing category.
But here is the best part; the reel features 4-disc carbon-fiber drag system that claims to offer up to 16.5 pounds drag power. No doubt, this is more than enough stopping power for a smooth casting experience if at all it leaves up to its claims. Also, it comes with 11+1 MaxiDur bearings along with an instant stop anti-reverse feature for incredible casting and quick hook sets. 
For a light-weight, light-duty, low-cost reel, the Okuma Citrix comes in with a good package of quality details. A diecast aluminum frame gives rigidity to the reel while graphite side plates cut the weight. A 10-bearing drive system produces a surprisingly smooth mechanical action for a reel at this price point. This high-speed machine weighs in at a mere 7.2 ounces but the reel still spools 130 yards of 12lb test line and pulls it in at 31 inches per crank with a 7.3:1 gear ratio.
I would prefer to fish a baitcaster all the time because I can cast it more accurately by controlling the spool with my thumb. The reels feature higher gear ratios than spinning models which I need for high-speed presentations such as waking a spinnerbait, buzzing a buzz bait across the surface or burning square-bill crankbaits in shallow cover. I also prefer a baitcaster for all of the power fishing techniques with heavy line such as pitching and flipping, Carolina rigging and slow-rolling spinnerbaits.

I go fishing a few times a week, and was looking for another reel to have another baitcaster setup. I currently have 2 Abu Garcia BlackMax 6.4:1 reels and some spinning setups, but was looking at trying something different. Between the high rating and the price, I thought I'd give this a try. The KastKing was not only $20+ cheaper, but also outperforms the Abu Garcias on every level - Less backlashes, smoother reeling, further casting distances. I'm just so happy with this reel, and can't wait to try out some of the other ones and ratios from KastKing.
×